Using Reaper Under MacOs
- 1 introduction
- 1.1 voiceover tips and tricks
- 1.2 other specific mac related concerns
OSARA is a plug-in which aims to work under Windows and Mac using the screen readers available for each platform. As has been probably explained elsewhere and in the reaper manual, there are some differences for achieving some procedures (like setting up track sends for instance). This article will attempt to bring them all in one place. it also will most likely be helpful for users of both platforms. note that due to the development of reaper and osara advancing simultaneously for some time now, possibilities are growing for accomplishing tasks so the information present on this article, while still relevant and applicable, is subject to change from time to time.
voiceover tips and tricks
voiceover talks too much/makes too much noise!
One of the first things (and most frequently described problems) users notice, is the excess speech and feedback being given by voiceover. For example, since macOS High Sierra, VO beeps every time OSARA provides feedback. This not only makes working in reaper tedious, it can also potentially become distracting and slow down the workflow. There are some things you can do to reduce these issues.
Reducing Voice Over Sounds With VO Activities
To stop VO beeping each time OSARA provides feedback, setup a Voice-Over Activity for Reaper as described below:
- Press VO-F8 to open Voice-Over Utility.
- Press command-0 to go to activities.
- Now, find the "Add" button at the bottom of the window and press it.
- You are prompted to make a name for the activity. making the name application specific is recommended but this is a personal preference.
- Now press VO+right-arrow until you hear: Additional settings (or how it is shown for your language). And here press vo-spacebar.
- Now continue to press VO+right arrow until you hear: Audio checkbox unchecked. Check it using Vo-spacebar.
- Continue once more to the right, and you'll find the options button, which you press by using vo-spacebar on it.
- Now you have to locate and check the box: Mute sound effects and go to the end of the window and close it by pressing either close or OK.
- Now you are back to the activities window. We now need to tell Voiceover when to use this activity.
- Press VO+right until it says: Webpages and programs menu button, and press VO+spacebar.
- Select Reaper from the list of applications. That's it, no more sound effects from Voiceover.
Note, many other options around verbosity can also be customized for the Reaper Activity you have created, including any Keyboard Commander assignments you have made. Below is another recommended Activity customization. Also, the above Muting of VO sound effects can also be added to a Keyboard Commander, key in the VO Utility.
Reducing Speech Verbosity
While setting up the activity as above, you can include verbosity settings. Press the "Set… Verbosity" button. and then expand the additional speech verbosity options. at the very bottom of the table of options which you can customize, there is an option called "Window". Customize the verbosity for this setting and uncheck the “Name” field. You will still need to have either status or type checked but this will stop Voice Over from telling you about your particular version of reaper and who it is licensed to, whenever you return to the main Reaper window. This reduces some of the extraneous speech
Muting Voice Over
Another option is to assign a Keyboard Commander shortcut key that will mute Voiceover completely. This is especially helpful when you don't want to be distracted while doing some precise edits. You can do this from within the Voice Over Utility accessed by pressing VO+F8, and then pressing Command+8 to access the commander options. Pick the Keyboard tab, and then Add an additional key and assign it to the Mute Voice Over toggle command.
note: VO is a short form for the Voiceover word. Remember you can use either caps lock or control-option keys as Voiceover mmodifier keys depending on how you have set Voiceover on your Mac.
there is no application key on mac
There are some situations in which you are advised to use the applications key, (for example, when setting inputs for recording).
The good news is that you don’t need an application-key on the mac. Recent changes in osara development and reaper allow users to access the menus reliably, regardless of system. This is because Rather than using various hacks to access context menus, osara now uses a new REAPER API function explicitly designed for this purpose.
This basically means that On Mac, you can now press control+1, control+2 and control+3 to open the first, second and third context menus, respectively. More detailed information is available in the osara readme
As for setting track inputs, the info that follows is out of date, but might be of use for some people. there is a simple trick to open the track-input-menu:
For example, lets say, you have an interface with 8 inputs and want to assign the first microphone-input to track 3, because track 1 and 2 contain virtual instruments. Then you could do the following:
- Press Voice-over+I to open the item-chooser.
- Type in 3 for track-number 3 and press enter.
- Make sure that quick-navigation-mode is off by pressing left and right arrow-keys simultaneously.
- Press voice-over+left once. That should bring you to an entry called „Track-input-record, followed by a number, which will depend on how many channels your interface has.
- Pressing voice-over+space will open the track-inputs-menu. Here you can assign the appropriate input.
adjusting effect parameters
Under Windows, the user would invoke an osara command with a single keystroke and adjust the effect parameters using a dialog which exposed all of the parameters that relate to that plug-in, but this dialog is not yet been done for mac. how do Mac users adjust effects then?
You can access the native or generic effects UI, depending on the particular effect you are using. the accessibility of the native dialogs vary between manufacturers; however, if you are using the default settings, then when you add an effect you will be in the native UI. First check this out and see if you can access the parameters, most of the included Reaper effects are accessible. For third party effects, it varies. If the native UI is not accessible, then press VO + space on the UI button and you will have some access to the parameters.